Bruker Data Processing

Introduction

Processing of spectra at the console is routinely required during data collection.  Here we describe some processing basics on Bruker spectrometers equipped with Topspin 2.0 and higher software.  The user is also refered to the extensive documention that accompany the software (under "Help").

Processing 1D Spectra Using TopSpin

1-Dimensional data sets are processed at the conclusion of the experiment using the command "fp" (Fourier transform and apply phase corrections) or "efp" (also apply exponential multiplication). 

To process a 1D experiment on the fly the user can transfer the current FID using the command "tr", then process as above.

In TopSpin, the phase correction sub-routine is initiated by the clicking the phase correction icon.  Zero and first order phase correction is applied by dragging the left mouse button over the "0" and "1" icons.

Figure 1:  Phasing a 1D spectrum

Baseline correction of 1D-spectra is done in an interactive fashion using the "bas" command and the "A", "B", "C", "D", and "E" icons.

Processing 2D Spectra Using TopSpin

2-Dimensional data sets are processed at any time during the experiment using the command "xfb".  Check processing parameters (under the processing tab or using "edp") and adjust number of points and apodization functions in each dimension.

Again phasing is accomplished using the phase correction sub-routine.  For 2D spectra rows or columns for phasing are chosen using the mouse and phasing is accomplished as above for each dimension.  The user stores the phase corrections and reprocesses using "xfb".

Figure 2:  A 2D ¹⁵N,¹H-HSQC spectrum

Automatic basline correction in each dimension is accomplished using the "abs1" and "abs2" commands.

Processing 3D Spectra Using TopSpin

Processing 3D spectra in Topspin is relatively straightforward.  The library of commands is available in the Processing booklet accompanying the system. 

Begin by setting the number of points in the processing parameters to low values to reduce the size of the processed data (i.e., 512x64x64). 

Next process and phase the F2F3 and F1F3 2-dimensional planes.  To select them type the "xfb" and a pop-window will appear to select the plane; type "23" or "13" and a new processed data number for the 2D plane.  Phase as above and store in the 3D spectrum.  To return back to the first processed data number type "rep 1".

Processing the 3D involves three successive commands:  "tf3", "tf2", and "tf1", to transformed the acquisition dimension (F3) and the two indirect dimensions (F2 and F1).

To manipulate (i.e., rotate) the cube click the cube icon.  In this mode you can view any plane and rotate along the "X", "Y" or "Z" axes.

Figure 3:  3D HNCO spectrum

Converting 2D and 3D Spectra Directly to Sparky Format

To convert 2D and 3D spectra directly to ucsf format for import into Sparky, go to the processed data directory for the experiment in UNIX.  Here you will find "2rr" (2D) and "3rrr" (3D) processed data files. Use the following commands to convert them into ucsf format:

bruk2ucsf 2rr [filename].ucsf

bruk2ucsf 3rrr [filename].ucsf

-- JimAramini - 10Dec2009